Netgear M4200-10MG-POE+ MANAGED SWITCH MANAGED SWITCH PREMIUM

Productomschrijving

• Merk:Netgear
• Artikelnummer:108687762
• Levertijd:1-3 dagen

Model Description:

• Full Power PoE+ 8x2.5G and 2x10G Aggregation Switch For Wave 2 11ac AP Deployment

Ordering Number:

• GSM4210P

Acoustics:

• Whisper quiet 28.9dB @ 25°C (77°F)

Power Consumption (Max):

• 281.6 Watts @ full PoE+

RJ45 Ports:

• 8 x 1G / 2.5G including two of these ports with 5Gbps capability

10G Fiber SFP+ Ports:

• 2 x SFP+ (1G and 10G speeds)

Power over Ethernet:

• 8 x PoE+ 30W ports

PoE Budget (Watts):

• 240W

Feature Set:

• Layer 3 (static routing and RIP dynamic routing)

Management Ports:

• 1G Ethernet service port for out-of-band management (OOB, RJ45)
• RS232 straight-through serial RJ45 for local management console
• Mini-USB port for local management console
• USB port for local storage, logs, configuration or image files

Form Factor:

• Easy Mount for standard rack mounting and plenum mounting on poles or walls

Key features:

• 1G, 2.5G and 5G NBASE-T compliant access layer in campus LAN and midsize organizations networks
• Line-rate 8 x 2.5G access layer and 2 x 10G aggregation for 802.11ac wireless access points with PoE+ full provisioning
• Advanced Layer 2, Layer 3 and Layer 4 feature set including static routing and RIP dynamic routing
• Multi-Gigabit NBASE-T enables 2.5X to 5X faster speeds up to 100m on legacy Cat5e/Cat6 cables - yet providing 100M and 1G backward compatibility
• Whisper quiet 28.9dB acoustics when operating at 25°C (77°F), well below normal offices ambient background noise
• Secure placement above drop-down ceilings, in air passageways and where other switches will not go, vertical or horizontal, flat or perpendicular
• Easy Mount options whether it's directly on a wall, attached to a rectangular or round pole, or mounted in a standard 19-inch rack
• PoE+ (30 watts per port) across all (8) Multi-Gigabit access ports with 240W budget
• Low latency and scalable table size with 16K MAC, 1K ARP/NDP, 1K VLANs, 64 routes
• SDN-Ready OpenFlow 1.3 support for maximum investment protection

Software:

• Advanced classifier-based, time-based hardware implementation for L2 (MAC), L3 (IP) and L4 (UDP/TCP transport ports) security and prioritization
• Selectable Port-Channel / LAG (802.3ad - 802.1AX) L2/L3/L4 hashing for fault tolerance and load sharing with any type of Ethernet channeling
• Voice VLAN with SIP, H323 and SCCP protocols detection and LLDP-MED IP phones automatic QoS and VLAN configuration
• Efficient authentication tiering with successive DOT1X, MAB and Captive Portal methods for streamlined BYOD
• Comprehensive IPv4/IPv6 static and IPv4 dynamic routing including RIP
• Layer 2 multicast forwarding with IGMPv3/MLDv2 Snooping and IGMPv2/MLDv1 Snooping Querier
• Advanced security including malicious code detection, DHCP Snooping, Dynamic ARP Inspection and DoS attacks mitigation
• Innovative multi-vendor Auto-iSCSI capabilities for easier virtualization optimization

Availability:

• Link Dependency new feature enables or disables ports based on the link state of different ports
• Per VLAN Spanning Tree and Per VLAN Rapid Spanning Tree (PVSTP/PVRSTP) offer interoperability with PVST+ infrastructures

Management:

• DHCP/BootP innovative auto-installation including firmware and configuration file upload automation
• Industry standard SNMP, RMON, MIB, LLDP, AAA, sFlow and RSPAN remote mirroring implementation
• Service port for out-of-band Ethernet management (OOB)
• Standard RS232 straight-through serial RJ45 and Mini-USB ports for local management console
• Standard USB port for local storage, logs, configuration or image files
• Dual firmware image and configuration file for updates with minimum service interruption
• Industry standard command line interface (CLI) for IT admins used to other vendors commands
• Fully functional Web console (GUI) for IT admins who prefer an easy to use graphical interface
• Single-pane-of-glass NMS300 management platform with mass-configuration support